--- updatedAt: 2025-11-04T16:43:03.000Z agentTools: projectIndex: https://docs.controld.com/llms.txt --- # Windows How to configure Control D on any Windows computer. # Automatic Setup (GUI) Want to spend the least amount of time setting up Control D on a Windows device? We probably read your mind. [GUI Setup Utility](https://docs.controld.com/docs/gui-setup-utility) is what you're looking for. # Automatic Setup (CLI) GUI is not your thing, or looking to do a scripted deployment? Have no fear, there is an app for that. [Command Line Daemon](https://docs.controld.com/docs/ctrld) is what you're looking for. # Automatic Setup ([YogaDNS](https://www.yogadns.com/)) Launch YogaDNS and navigate to `Configuration > Configuration Wizard`. Select `Control D DoH` as the provider. Enter your Control D resolver ID and an optional client name. YogaDNS will work seamlessly to route your queries via Control D. CDYogaDNS # Manual Setup Want to do everything manually? We understand, some of us still drive stick shift. There are a few ways to do it. ## PowerShell (Legacy DNS) If you're looking for a 1 liner command to configure Legacy DNS on an interface, this is it. The following example will configure `76.76.2.2` (free ad-blocking DNS resolver - yours will be different) on the default network interface. Be sure to run this in Admin prompt. ``` Get-WmiObject -Class Win32_IP4RouteTable | where { $_.destination -eq '0.0.0.0' -and $_.mask -eq '0.0.0.0'} | Sort-Object metric1 | select interfaceindex | set-DnsClientServerAddress -ServerAddresses ('76.76.2.2') ``` Wow, that was easy. ## To Revert DNS Changes via PowerShell Open PowerShell as Administrator: * Press Win + X and select "Windows PowerShell (Admin)" or "Windows Terminal (Admin)" if you're on a newer version. Run the following command to revert back to obtaining DNS server addresses automatically: ``` Get-WmiObject -Class Win32_IP4RouteTable | where { $_.destination -eq '0.0.0.0' -and $_.mask -eq '0.0.0.0'} | Sort-Object metric1 | ForEach-Object {Set-DnsClientServerAddress -InterfaceIndex $_.InterfaceIndex -ResetServerAddresses} ``` Explanation: This script iterates through each network interface that has a default route (indicated by destination 0.0.0.0 and mask 0.0.0.0), and resets its DNS server addresses to the default settings. This should revert your DNS settings back to automatic configuration and effectively "uninstall" the manual DNS setup for Control D. ## netsh (Legacy DNS) Powershell not your thing? Sure, let's setup Legacy DNS another way. Fire up that Admin prompt. List all interfaces and find the Interface you are currently using or want to change the DNS server on. ``` netsh interface ip show config ``` Here we're gonna assume **Ethernet0** and DNS server **76.76.2.2** (yours will be different). ``` netsh interface ipv4 set dns name="Ethernet0" static 76.76.2.2 ``` .... and you're done. ## netsh (Secure DNS) > 🚧 Compatibility Warning > > Windows 11 is required to execute these commands. Running Windows 11 and wish to setup DNS-over-HTTPS? Good thinking, let's do that. Want a super detailed guide? Check out this [blog post](https://blog.controld.com/how-to-set-up-control-d-on-windows/). Otherwise, fire up that Admin prompt. First, let's create a DOH template. Keep in mind, your `server` and `dohtemplate` values will be different. ``` netsh dns add encryption server=76.76.2.2 dohtemplate=https://freedns.controld.com/p2 ``` List all interfaces and find the Interface you are currently using or want to change the DNS server on. ``` netsh interface show interface Admin State State Type Interface Name ------------------------------------------------------------------------- Disabled Connecting Dedicated Local Area Connection 3 Disabled Connecting Dedicated VMware Network Adapter VMnet1 Enabled Connected Dedicated Ethernet0 Disabled Connecting Dedicated Wi-Fi ``` Choose the network that is both Enabled and Connected. Here we're gonna assume **Ethernet0** and DNS server **76.76.2.2** (yours will be different). ``` netsh interface ipv4 set dns name="Ethernet0" static 76.76.2.2 ``` Now, for some reason you have to open the GUI Settings app, navigate to **Network Settings**, and edit your interface. Go to **DNS server assignment**, choose **manual IPv4,** and choose the **On (automatic template)** drop-down menu option for **DNS over HTTPS**. ![](https://files.readme.io/9ac1978-doh_template.JPG "doh_template.JPG") ## To revert `netsh` method: Open Command Prompt: * Right-click the Start menu and select "Command Prompt (Admin)" or "Windows PowerShell (Admin)". Run the command: `netsh interface ipv4 set dns name="Ethernet0" dhcp` * This command sets the DNS back to being obtained automatically via DHCP. * If this doesn't solve it, you might have used the command with some different interface name. To find the correct interface name, run: `netsh interface ipv4 show config` * Look for the DNS settings and interface name and then apply the command accordingly.